Iowa-Industrial Moderated Mailing List -- Current and Archive   >   Eastern Iowa   >   Welding and Soldering   >   Arc Welding   >   MIG Metal Inert Gas   >   Keri MS5000 proximity reader

Keri MS5000 proximity reader


Poster: 1574878040@iowa-industrial.com

Keri MS5000 proximity reader

MS Series Proximity Readers are designed to blend aesthetics, read range performance, and small
package size with an extremely thin profile into a product that is priced significantly less than competing
proximity readers. The readers are for use exclusively with Keri's revolutionary access control system based on
PXL-500 Tiger II Controller and were designed by some of the industry's top RF engineers, with many
years of experience in proximity reader design.
The smallest readers in the series are the
MS-3000 MicroStarâ„¢ Reader and the MS-5000 MiniStarâ„¢ Reader.
MicroStar Reader measures just 3.4" long x 1.4" wide x 0.38" thick (86mm x 36mm x 10mm) thick, and is
designed to mount on a metal window or door frame (mullion) or directly on a wall. Read range is up to 4"
MiniStar Reader measures 4.3" long x 3.0" wide x 0.38" thick (109mm x 76mm x 10mm), and
can be mounted on a single gang electrical box or flat on a wall. Read range is up to 6" (15cm) when
mounted at least one inch off metal. If the reader is mounted using a metal electrical junction box with the
thickness of the wall material separating the reader from the box, read range will be reduced.
The readers are attractively designed with a thin profile and modern appearance. The readers are compatible
with all of Keri's proximity card styles as well as the small, extremely robust Keri Key Tag. Additionally, they
can read any Indala ASP Card or Tag if they are to be used in conjunction with a PXL-500 Controller.
4.3" H x 3.0" W x 0.38" T (MS-5000)
+12 VDC nom. (5-14 VDC) (MS-5000)
Tri-Color Standard (Red, Green, Amber)
125 KHz excitation, 62.5 KHz data return
Lifetime warranty against defects in materials



Keri MS5000 proximity reader