EQUIPPED WITH TOSHIBA MOSFET
40-AMP Plasma Cutter with 160-AMP TIG and 150-AMP Arc (MMA)Welder
40-AMP Plasma Cutter with 160-AMP TIG and 150-AMP Arc (MMA)Welder
Guaranteed against dead on arrival or we will exchange it for a new unit for free
We are proud to introduce the CT416D 3 in 1 40-AMP Plasma Cutter with 160-AMP TIG and 150-AMP Arc (MMA) Welders
This EVERLAST Plasma Cutter is portable and operational on dual voltages. It's light weight of only 40lbs, makes this unit a necessity at home or on the job. Everything is included for you to start cutting or welding today!
IF YOU NED TO DOWNLOAD OWNERS MANUAL CLICK HERE
EVERLAST AND LONGEVITY ARE IDENTICAL UNITS AND COME FROM SAME FACTORY
Included: cutting torch & earth clamp
CT416D 40AMP Plasma Cutter/Tig/Arc Welder CT416 (#220115677562)
Item arrived as described and new. Great! Thanks!
CT518D 50AMP Plasma Cutter/Tig/Arc Welder CT518 (#220116834289)
Showed quickly, huge bargain for a Multimode unit.
CT518D 50AMP Plasma Cutter/Tig/Arc Welder CT518 (#220113983426)
CT518D 50AMP Plasma Cutter/Tig/Arc Welder CT518 (#220112201532)
Got the item as described and it works good
CT518D 50AMP Plasma Cutter/Tig/Arc Welder CT518 (#220107178306)
Super160 160A AC/DC TIG MMA WELDER 40AMP Plasma Cutter (#220110885641)
recieved quickly and in good shape thanks
CT416D 40AMP Plasma Cutter/Tig/Arc Welder CT416 (#220110891643)
CT416D 40AMP Plasma Cutter/Tig/Arc Welder CT416 (#220110891643)
Super160 160A AC/DC TIG MMA WELDER 40AMP Plasma Cutter (#220106941188)
40 Amps Plasma cutter: Duty Cycle 60% at 40 Amps and 100% at 30 Amps. 0.5 inches clean cut with 7.2 inches per minutes; 3/4 inches severance cut with 3.1 inches per minute. Rated Output Current is 40Amps under both AC 110V and 220V. Works in both 50 and 60 Hz with operating air pressure as 65 psi @ 3 cfm
160 Amps Tig Welder: Duty Cycle 60% at 160 Amps ARC and 100% at 95 Amps ARC. Gas Flow: 2-5 L/Minute. It can weld all stainless steel.
150 Amps Arc Welder: Duty Cycle 60% at 150 Amps and 100% at 90 Amps.
well-known cutters. But the price is much lower than those machines.nes.
Portable: This machine weights only 35 lbs and 480 mm Length x 210 mm width x 310 mm height.
Cutting Specs: (High Frequency Start)
3" Per minute @ 3/4" Steel (Severance Cut)
7" Per minute @ 1/2" Thick Steel
17" Per minute @ 3/8" Thick Steel
Nozzle Int. 1.2mm Air Pressure 60psi
Cut Thickness 1/2" Cut Gas Flow 2.8cfm
The Argon Regulator is used with the TIG feature. If you want the most from the unit, we strongly recommend the regulator.
* For returns, contact must be made within 48 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. However, the damage must be reported within 48 hours of delivery
* Items returned must be in an unused condition. We will inspect all returns before accepting the package. We will not accept packages that are not in original packaging, have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Ifyou have any questions contact us via email at: EVERLAST_INC@HOTMAIL.COM OR (650)588 8588 x 201
