26" x 120" CINCINNATI HYDRASHIFT TOOLROOM ENGINE LATHE
Swing over cross slide 17-1/2"
Distance between centers (max.turning length) 48 to 216
Swing over bed, raised models - raised / swing:
Spindle speed range - High 24 To 960 RPM
Spindle nose - Standard long taper key drive L-2
Spindle - diameter of hole thru - L series only 2-5/16"
Spindle - size of center #5 Morse
Number of thread and feed changes 54"
Range of threads per inch, low, standard and high speed ranges 1-1/2 to 92
Range of feeds - carriage, low, standard and high speed ranges .0019 to .1215 IPR
Range of feeds, cross slide, low, standard and high speed ranges .0019 To .0578 IPR
Leadscrew (Acme) diameter in inches and threads per inch 1-5/8" to 4"
Tool holders - size of tool shank, inches and # 3/4 x 1-5/8" (#3)
Spindle - Size of center #5 Morse
Tailstock setover, either side of center 1"
Max. turning length at one setting 20"
Face plate - large and standard 25-1/2" & 13-3/4"
Steady rest, standard capacity - min. and max. diameter 1/2" to 8"
Steady rest, oversize capacity - min. and max. diameter 7-1/2" To 15"
Follow rest capacity - Min. and max. diameter 3/4" To 5"
Motor - Standard, high or super high spindle speed range 10 HP
