* SAE 37° (JIC) Steel Male Connector Fitting.
* Working pressure up to 10,000 psi, depending on tube and fitting size.
* Used with copper, brass, steel, aluminum, and other tubing that can be flared.
* Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment.
* Meets or exceeds ASA, ASME, SAE, and MS specifications.
* Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required.
1. Slide nut on tubing. Threaded end of nut must face out.
2. Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out.
3. Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off.
4. Assemble tubing to fitting body. Tube nut should be turned hand tight.
5. Tighten assembly with a wrench.
SAE 37° (JIC) Steel Fitting Illustration
SAE 37° (JIC) Steel Fitting Illustration
I'm listing quite a few lots of WEATHERHEAD items so
Please be sure to check out my other items & my store
Thanks for looking & good luck
Check out my other items! Be sure to add me to your favorites list!
