Iowa-Industrial Moderated Mailing List -- Current and Archive   >   Eastern Iowa   >   Backflow and Plumbing Related   >   Backflow Valves   >   Making rifle barrels guns gun gunsmith

Making rifle barrels guns gun gunsmith


Poster: 418587810@iowa-industrial.com

Making rifle barrels guns gun gunsmith

bounce, yer money order will get lost in the mail and yer dog won't come home.
click on our "Contact Us" icon above for the quickest response to your questions.
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
MAKING RIFLE BARRELS GUNS GUN GUNSMITH
Machinery's Industrial Secrets
Selected articles from early issues of Machinery Magazine revealing secrets of manufacturing.
More than 90 different operations went into manufacturing barrels for the British Lee-Enfield rifle during WWI!
The first third of this booklet shows in detail how the Brits did it- the machines, techniques, and tricks necessary to drill a long, deep, perfectly straight hole into very hard steel, straighten the tube if necessary and then cut rifling grooves.
It's heavily illustrated with photos (not great quality unfortunately), and drawings revealing the drills, reamers, laps, relieving cutters, thread millers and the multitude of other tools used.
Then it's "Drilling, Reaming and Straightening Rifle Barrels" as it was done in another factory. Again, it's wall-to-wall illustrations of barrel drilling machines, jigs for sharpening the special drill bit, Pratt & Whitney reaming machines, straightening techniques, and so on, all the way to polishing the barrel. You even get formulas for solutions to brown the barrels!
Finally you get two short illustrated articles, "Machining Rifling Bars on the Bench Lathe", and "Drilling a Long Blind Hole".
Obviously, during WWI there were many articles on manufacturing ordnance, but almost all of it was concerned with speeding up production. These four articles are the best for us since they cover how-to.
Machining a rifle barrel is quite an achievement. Here's how it was done almost a centuary ago on relatively simple equipment probably much like the equipment you have in your garage!
5-1/2" X 8-1/2" Softcover 63 pages profusely illustrated with 75 black & white photographs & drawings.
Visit my MarketplaceAdvisor Gallery! Power Tools for Power Sellers!
Phone: (***) 744-4449 M-F 9:00 to 4:00 Pacific Standard Time
This item has been seen by alt people!





Making rifle barrels guns gun gunsmith