Cincinnati Milacron T-10 Vertical Machining Center
Cincinnati Milacron T-10 Vertical Machining Center
* This machine does not have an hour meter.
* The controller is the original controller. It is not a retrofit.
* The machine is in operation and is accurate. There is some backlash in the Z axis, but not enough to be a problem.
* There are 45 tool holders.
* This machine was purchased used in the 1990’s.
* The design of this machine is excellent when it comes times to work on the machine. The X, Y axis is column travel. The Z axis is saddle travel.
* The machine indexes in 1 degree increments.
* There is a second machine that is available for parts and can be purchased inexpensively.
* There is a second machine, same thing, that can be repaired and made operational with very little effort and cost
Freight costs to be quoted at time of sale from zip code 06787. All freight costs to be paid by the purchaser. Should you have questions, please contact Joe or Dick at (***)-484-4449. Or email 484624656@iowa-industrial.com or 484624656@iowa-industrial.com
