Iowa-Industrial Moderated Mailing List -- Current and Archive   >   Eastern Iowa   >   Welding and Soldering   >   New 220V voltage 40 amps plasma cutter

New 220V voltage 40 amps plasma cutter


Poster: 1616284234@iowa-industrial.com

New 220V voltage 40 amps plasma cutter

Single 220V Voltage 40 Amps Plasma Cutter
It is Brand New, fully tested 220 VOLTAGE UNITED 40Amp Plasma Cutter Welder. The retail price is much more than our asking price, but for a limited time, we are offering this unit for a fraction of the price.
· 40 Amps Plasma cutter: Duty Cycle 60% @ 40 Amps and 100% @ 30 Amps. 0.50 inches rated cut with 7.2 inches per minute; 3/4 inch severance cut with 3.1 inches per minute. Rated Output Current is 40Amps @ 220VAC. Works in both 50 and 60 Hz with operating air pressure of 65 psi @ 3.2 cfm.
· Portable: Machine weighs only 19 lbs is 16 inches long x 6 inches wide x 9 inches high. This machine comes with torch, ground clamp and cables, air filter/regulator and initial consumables.
· Works in both 50 and 60 Hz with operating air pressure of 65 psi @ 3.2 cfm.
· The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.
Plasma Cutter - Inverter Unit, Ground Cable & ground clamp, Torch with hose, electrode, nozzle, ceramic shield cup and swirl ring, Air filter/regulator, hose, clamps, mounting bracket and owner manual
No refund! The machine is sold with One year Warranty and we always honor our machine warranty. There is no reason to return the machine for refund.
· Air supply required - 3.2 CFM @ 65 PSI
· 220 or 110 VAC power source & plug





New 220V voltage 40 amps plasma cutter