Welds material from 22 gauge to 1/2 in thick in a single pass. Perfect for metal fabrication, maintenance and repair, farms and ranches.
Internal power source cooling system that only works when needed, keeping internal components cleaner.
Allows you to use either a standard MIG gun or a Miller Spoolgun without flipping a switch. The machine senses which gun you are using when you pull the trigger. No upgrade is required. This machine comes spoolgun ready right out of the box.
Gives you consistent arc starts, softer welding arcs, an easier to control arc on low end setting, and reduces spatter.
New! Large, digital front panel with builtin digital timers menu enables operator to preset voltage and wire feed speed.
New! Angled, Dual-Gear-Driven, Aluminum Drive System features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
New! Push-Pull Gun Direct Connect now directly connects your push-pull gun, no extra module required.
Adjustable run-in control is individually settable for both MIG and spool guns. Set at the front panel, this easily accessible feature allows the user to optimize starts to their application.
Self-calibrating digital meters allow presetting of voltage and wire feed speed. With spool gun, wire speed meter displays setting - a feature not available on competitive units.
Easy-to-use Digital Operator Interface and attached parameter chart makes it simple to set weld parameters.
Convenient built-in gun and cable holder and consumable compartment.
*1 Second Tip Saver - Arc shuts off if tip is shorted to work surface for more than 1 second.
*2 Minute Wire Saver - Wire drive is shut off if arc is not detected 2 minutes after trigger is pressed.
Line voltage compensation keeps welding parameters constant even when input voltages change ±10%. Eliminates the need to change welding parameters throughout the day.
15" M-25 MIG Gun features durable one-piece handle, unicable outer jacket, trigger rated for one million cycles, and steel spring coils protecting cable ends.
* Light Industrial Applications
* Requires 1-Phase Power (200/208v, 230V)
* 200 Amps at 28 VDC, 60% duty cycle
* 250 Amps at 28 VDC, 40% duty cycle
* New!15 ft (4.6 m), 250 amp M-25 MIG gun
* Factory - installed gas solenoid
* Argon mix regulator/flow gauge with hose
* Industrial power cord and plug (plug on this 200/230 V model only)
* Factory-installed running gear/cylinder rack
* .030/.035 in reversible dual groove drive rolls
* Set-up and operation video
* Money Orders & Cashier Checks may be sent to:
* Orders generally take 5-6 Business Days to reach you.
If your package arrives damaged, please contact us to arrange the best way to handle your return.
Due to safety requirements involved with much of the equipment we carry, product returns of used equipment is handled on a case-by-case basis.
