Iowa-Industrial Moderated Mailing List -- Current and Archive   >   South Iowa   >   Welding and Soldering   >   Arc Welding   >   MMA Manual Metal Arc   >   Hp 180C oscilloscope w/ HP1801A & hp 1821A **tested**

Hp 180C oscilloscope w/ HP1801A & hp 1821A **tested**


Poster: 1316723174@iowa-industrial.com

Hp 180C oscilloscope w/ HP1801A & hp 1821A **tested**

HP 180C Oscilloscope w/ HP1801A & HP 1821A **TESTED**
It has had basic functionality testing on both channels and is working fine
But unit may need an Alignment
1 x 1801A Dual Channel Vertical Amplifier (50 MHz)
1 x 1821A Timebase and Delay Generator
2 x New HP 10008B Voltage Passive Probe with manual
The 1801A Dual-Trace Vertical Amplifier Plug-In has a vertical sensitivity of 5 mV/div to 20 V/div. Bandwidth is DC to 50MHz. Rise time is 7 ns. Fits all 180-series Oscilloscopes
The 1821A Timebase Plug-In is a delayed sweep type unit with sweep range of 0.1 µS to 1 S/div (22-position); Internal or external triggering (to 100 MHz) plus Auto and EXT/10
This item is used, tested and working. Wear may be evident.
Local Pick up is also available at our office in Clayton South VIC 3169 with 24 Hrs Prior Notice.
Building Trust in Transactons (tm)
If you have any questions please contact Naing Nyunt or
Phone (switch) +613 9558 0004 Ext : 138
Office Hours are 9.00AM - 5.00PM





Hp 180C oscilloscope w/ HP1801A & hp 1821A **tested**