Iowa-Industrial Moderated Mailing List -- Current and Archive   >   Tristate Area   >   Welding and Soldering   >   Arc Welding   >   MIG Metal Inert Gas   >   Exide depth charger D3E2 36 volt 1500 amp hour

Exide depth charger D3E2 36 volt 1500 amp hour


Poster: 184165038@iowa-industrial.com

Exide depth charger D3E2 36 volt 1500 amp hour

The fully automatic Depth Charger features proportional charging for cool operation. Every battery has its own optimum charging capacity, and only the EnerSys Depth Charger accounts for the difference. The Depth Charger monitors the condition of your battery and adjusts to its power needs. Just connect the battery to the Depth Charger, and the I-E-I charging characteristic takes over. The Depth Charger proportionally charges every battery depending on its AH need and depth of discharge by regulating the starting current, the voltage, and the finishing current. The result is a complete, controlled charge every time, and the I-E-I charging current ensures a cool charge. Your battery will not be damaged by high temperature during charging. When a full charge is reached, the Proportional Charge Termination shuts down the Depth Charger automatically.
Maximum productivity through intelligent technology…
Solid state integrated circuitry with auto-start
The EnerSys - IEIE electronically programmed charge characteristics
Automatic current adjustment eliminated overcharge, undercharge, and overheating
Programming delay start for “off-peak” charging (Saves on Utility Rates)
Programmable and manual equalize charging
Reverse polarity and overload protection
Cooldown timer to allow batteries time to cooldown
AC power failure recovery resumes exactly where stopped
3 high stackable and drip-proof cabinets
Max start rate over-ride timer (Redundant timer that is field programmable)
100% Rated Charger designed to return 108% of charger nameplate in 8 hours or less
Can be factory ordered or field retrofitted to recharge VRLA product.
PLEASE NOTE THIS CHARGER CAN BE PROGRAMED FROM 6 TO 36 VOLTS AND ANY AMP/HR YOU WISH UP TO 1500 AMPS PLEASE LET US KNOW AND WE WILL GLADLY SET THIS CHARGER UP FOR YOUR SPECS THANKS ALSO THIS IS A USED UNIT ALSO CAN BE SET FOR 208, 240, OR 480 POWER SUPPLY AND ONE LAST THING PLEASE CONTACT ROGER AT TERRELL BATTERY (***)-257-1640 OR 1-(***)-601-9076 IF YOU HAVE ANY QUESTIONS WE HAVE TONS OF BATTERIES AND CHARGERS FOR SALE PLEASE VISIT US AT





Exide depth charger D3E2 36 volt 1500 amp hour