Output: 9 Volts DC 1 Amps (9V, 1A)
Input: 110/240 volts AC. 50-60 Hz
This power supply will be ideal for any 9V DC item, including LCD Screens, audio and video devices, recording equipment, R/C, digital cameras, and any other electronic device that requires high quality stable DC power. This adapter will protect your valuable electronics from both spikes and dips in power, and will shut itself down if the power becomes unstable. It is then reset by being unplugged and replugged in. It is vastly superior to cheap look alike adapters, and normally retails for about 24 U.S. Dollars.
About the Connector: Connector Size: 5.5mm (Outside barrel)x 2.5mm (Inside Barrel)
About selecting the correct power adapter:
Amperage: Amperage (Amps, A) represents the maximum load that your device can draw. You must select an adapter that is capable of the same , or HIGHER, amp rating than the device will draw. It is good to use an adapter that can handle a bigger load than your device draws, this way the adapter will run cooler and more stable. Running a 800mA (.8 Amp) device on a 1 Amp adapter means the adapter will not have to work as hard.
Voltage: The voltage (V) of the adapter has to be an exact match with the rating of the unit you want to use it with.
˙Short circuit protection on all outputs
˙100% Burn-In tested at full load
