* Powered it up this weekend
* Fully Manual Machine (No Air Needed)
* Spindle up and down fully Manual
* Half converted to air (Spindle up and down and X side to side)
* X axis fully manual (gear and rack set up)
* X axis lever all there with a Air cylinder installed
* Table 6 3/4" x 21" at the clamp surfaces
* 12" spindle extension with the bushings (Spacers)
* 1 h.p. Motor, 3 PH, 1740 RPM
* Variable speed (5 belt pully system)
* Change Motor out for single phase
* All the air hoses are not hook up